Compatible FTDI USB Cable RS485 WE BT 1800

Same Pinout same FTDI FT232RQ chip. Cables mounts in Sinforcon Factory

FT232RQ to USB UART Converter, SP485 to UART to RS485 shift signals

Duplex medium, not insulated

On-board with 120R terminal resistor, 10K Pull Up and Pull Down resistor

Features of FT232R:

Single USB chip for asynchronous serial data transfer.

All USB protocol manipulated on the chip-Does not require USB-specific firmware programming.

Support UART interface for 7 or 8 bits of data, 1 or 2 bits of stop and pair/pair/mark/space/no parity.

Fully assisted hardware or handshake of X-On / X-Off software.

Data transfer rates from 300 baud to 3 Megabaud (RS422/RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).

Built-in support for event characters and line break condition.

New USB FTDIChip ID? Characteristics.

New CBUS I/O configurable pins.

Auto transmits damper control for RS485 applications.

Transmit and receive LED drive signals.

New 48MHz, 24MHz,12MHz and 6MHz output signal Options to drive external MCU or FPGA.

FIFO receives and transmits buffers for high data throughput.

256 Byte receive buffer and 128 Byte transmit buffer using buffer smoothing technology to enable high data throughput.

Adjustable receive buffer timeout.

Synchronous and asynchronous bit bang mode interface options with RD# and WR#strobes.

New option CBUS bit bang mode.

Built-in 1024-bit EEPROM for I/O configuration and USB storage VID, PID, serial number and product description.

Supplied pre-programmed device with unique USB serial number.

Support for USB suspend/resume.

Support for bus powered, self powered, and high power bus powered USB settings.

Built-in 3.3V level converter to USB I/O.

Integrated UART and CBUS level converter for interface with 5V - 1.8V Logic.

True 5V/3.3V/2.8V/1.8V CMOS drive output and TTL input.

High I/O pin output drive option.

Integrated USB resistors.

Integrated power reset circuit.

Fully integrated watch-no need for external crystal, oscillator or resonator.

Fully integrated AVCC power filtering-No separate AVCC pin and no external R-C filter required.

Reverse UART signal option.

USB mode bulk transfer.

3.3V to 5.25V Single Supply Operation.

Low operation and USB suspend the current.

Low USB band consumption.

UHCI/OHCI/EHCI compliant host controller.

USB 2.0 Full Speed compatible.

-40°C to 85°C extended operating temperature.

<button type="button" class="comet-v2-btn comet-v2-btn-slim comet-v2-btn-large extend--btn--aAOvo5q comet-v2-btn-important" style="-webkit-tap-highlight-color: transparent; outline: 0px; touch-action: manipulation; font-family: inherit; font-size: 16px; line-height: 24px; margin: 16px auto 0px; overflow: visible; padding: 9px 12px; font-style: inherit; font-variant: inherit; font-weight: 700; font-stretch: inherit; font-optical-sizing: inherit; font-kerning: inherit; font-feature-settings: inherit; font-variation-settings: inherit; border-color: var(--color-grey-1," border-radius:="" appearance:="" cursor:="" display:="" height:="" position:="" transition:="" all="" 0.3s="" user-select:="" text-wrap:="" min-width:="">See more</ button>